Charged from a 230v standard mains socket power or from a 12v Car charger 

This battery's UPS capabilities, low fan noise and added protection against temperature, moisture, overload and short circuit, provide clean and cableless power in a small portable powerbank. They can be charged from 230v standard mains socket power or from a 12v Car charger. 

VoltPax VXL3000 3kWh Battery 

Weighing less than 30kg this VoltPax VXL3000 can, for example, run an ARRI S60-C Sky Panel at 100% Output for nearly 6 Hours Without a break. (The ARRI S60-C runs at 450w) 

VPX5000 5Kwh Battery (5000w Inverter) 

Output 

AC output 
Rated current 16A 
Rated voltage 
220VAC 
Efficiency 
≥88% 
Overload capacity 
3000W<load<3500W,2min 6000W<load immediately 
Short circuit protection 
Yes 
Over temperature protection 
Yes 
Noise 
Load>3000W.Max.60dB 
DC12V/10A output 
Rated voltage 12V 
Rated current 
10A 
Overload power 
>120W .1S 
Short circuit protection 
Yes 
USB output 
Rated voltage 5V 
Current 
5V/3A 9V/2A 12V/1.5A 
Short circuit protection 
Yes 
XT90 Connector 
Rated current 30A 
Rated voltage 
220V 
Overload capacity 
5000W<load<5250W,2min 8000W<load immediately 

Input 

AC output 
Maximum charging power 960W 
Charging time 
≥8h 
Solar charging 
Input voltage 48~56V 
Maximum circuit 
20A 
Maximum charging power 
960W 
Charging time 
>24h 
Remarks: It supports charging while discharging, and does not support UPS function. 

Battery Pack 

Battery option 
Lithium iron phosphate 
Nominal Capacity 
100Ah 
Nominal Voltage 
51.2V 
Max Charging Voltage 
58.4V (16 series) 
Life cycle 
2000 cycles 
Protection 
Discharge & charging, Over current protection, Over voltage protection, Low voltage protection, Short circuit protection, High temperature protection, low temperature protection 

Inverter 

Wave Form 
Pure Sine Wave 
Continuous output 
5000W 
Output voltage 
AC 220V 
Output current 
22A 
Rated output frequency 
50HZ 
Efficiency 
90% 
Input Voltage 
46V±0.2V~56V±0.2V 
Charging rated current 
20A 
Protection 
Low voltage protection, Over voltage protection, Over load protection, Short circuit protection, Over temperature protection, Over current protection 

Protection Circuitry Function 

Low voltage protection 
When the battery voltage is lower than DC46V, the output will be turned off and warm. The voltage recovery to 52V, it will restart automatically. DC46±0.5V 
Over voltage protection 
When the battery voltage is higher than DC58V, the output will be turned off and warn, and once the voltage recovery to 56V, it will restart automatically. DC58V±0.5V 
Over load protection 
When the 0utput is overload, power over 5000W, the product will turn off the corresponding output, and then it will automatically start thrice (at an interval of 10s). If there is still an overload, over-current or short circuit alarm, the output will be locked, and it needs to be manually troubleshooting and then restart. If the output stops repeatedly after restart, please stop using it immediately (only after troubleshooting) or contact the seller or maintenance agent for help. 5000W±50W 
Short circuit protection 
When the output is Short circuit, the product will turn off the corresponding output within 100uS, and then it will automatically start thrice. If there is still an overload, over-current or short circuit alarm, the output will be locked, and it needs to be manually troubleshooting and then restart. If the output stops repeatedly after restart, please stop using it immediately (only after troubleshooting) or contact the seller or maintenance agent for help. 50~100uS 
Over temperature protection 
When internal radiator temperature ≥40°C; cooling fan start cooling. ≥40°C±5°C 
Efficiency 
90% 
Input Voltage 
46V±0.2V~56V±0.2V 
Once the internal radiator temperature ≥80°C to turn off the output, the internal radiator temperature to restore to 60°C, then automatically restart 
≥80°C±5°C 
Charging protection 
Once the battery voltage is over than 58V, the charging connection is automatically cut off, and when the battery voltage drop to 56V, then the connection is automatically restored